The cleaning work of brick machine equipment needs to start from the following four aspects. Firstly, it is necessary to regularly check the operation of the equipment for any problems or malfunctions. Staff should promptly inspect the equipment for any waste and handle it promptly; We need to pay attention to sufficient materials in the equipment. We should always pay attention to whether there is waste in the motor and parts. If timely cleaning is required, it should not be stacked for a long time to avoid equipment failure. Maintenance rules for brick machine equipment manufacturers: (1) Check each travel switch, and if it is loose or damaged, adjust and replace it in a timely manner. (2) If the connecting screws of the hollow brick machine are loose, they should be tightened in a timely manner. (3) Lubricate the lubrication points and components for each shift. (4) After running the brick machine for a week, the vibration box should be checked. During the running in period, the axial clearance between the two shafts should not exceed 0.8MM. If there is a gap, it should be adjusted in a timely manner to reduce the bearing gap. Adjust the center bolt of the pressure measurement cover without any axial direction. Flexible gap and accurate operation. The oil level should not exceed 40mm. If there is any abnormal sound during use, the inspection should be stopped. It usually lacks oil or has damaged bearings. Wait for refueling and replacement before starting work.
Fujian New Oriental Machinery Co., Ltd. Address: No. 98, Linan Industrial Park, Xianyou, Fujian Province Sales Department: 0594-8185588 After sales department: 0594-8186888
Hong Kong Oriental Machinery (International) Limited: Address: Room 2, 9th Floor, Commercial Centre, 1 Mong Kok Road, Kowloon, Hong Kong Hong Kong phone number: 14714336258
